I’m nicely previous the purpose of no return on my plans for the partitions in our bed room, however let me simply state this very clearly. After this week, I’m completely regretting my resolution to do wainscoting on this room. And it’s not as a result of I don’t like the way it look. In truth, I LOVE the way it seems. I couldn’t be extra thrilled with how the lobby turned out, and I’m anxious to see it by means of to completion with the grasscloth wallpaper.
No, it’s not the general design plan that I used to be regretting final evening after I went to mattress. It’s the truth that I selected to place wainscoting within the one room that’s the most unlevel and out of sq. room in our entire home. And it additionally has the waviest partitions I’ve ever handled. I’ve by no means had this a lot bother putting in trim in every other room of our home. Usually, issues are a little bit bit unlevel, or only a contact out of sq.. I can usually disguise that in order that when it’s completed, these imperfections aren’t apparent. However this room is on one other degree altogether.
However imagine you me, I gained’t quit. And when it’s completed, it WILL look good. This has change into my very own private problem now, and there’s no means I’m going to let this room defeat me. 😀
The excellent news is that this lengthy wall went pretty easily. I’m grateful that the principle wall within the entrance of the room is the wall that’s fairly flat and might be essentially the most degree and sq. in the entire room.

I’m particularly grateful for that because it’s the one wall that gained’t have furnishings or draperies layered over it. I did this wall first, and I used to be feeling fairly assured. However that confidence light fairly shortly as I moved across the room.

As I labored my means across the room, I couldn’t rely upon measurements for trim placement. I attempted measuring from the ground, however that was a horrible thought for the reason that ground is so unlevel. I attempted measuring from the ceiling, however that gave me the identical drawback. So I attempted to simply depend on my ranges. I used a bubble degree and a laser degree. I assumed for positive that may be the easiest way to go.

However utilizing that methodology, as I received to the final wall the place the bed room chair rail meets the lobby chair rail, I used to be about an inch-and-a-half off.

I misplaced rely on what number of occasions I eliminated the chair rail and re-installed it. I used to be actually contemplating falling by the wayside and developing with a brand new plan, however I’m means too cussed for that.

Anyway, I believe I received this wall with the lavatory door trying fairly first rate. It’s not good, however as soon as the whole lot is within the room, I believe it’ll look good.

And the headboard wall is ok. Once more, I needed to take away and reinstall that trim numerous occasions, however I lastly received it trying fairly degree (splitting the distinction right here, and splitting the distinction there). However this wall shall be principally coated with draperies and a headboard anyway, so I’m not too involved.

However this nook is simply…UGH. It’s so out of degree you could see it. I imply, there’s no disguising that.

So putting in the trim there was a nightmare. I’m nonetheless not happy with the way it seems, so I’ll in all probability find yourself taking these baseboard items off, trimming some off of the underside, and reinstalling it so that it’ll disguise that prime level within the ground a bit extra.

I imply, you’ll be able to see simply by taking a look at it that the baseboard trim goes up in the direction of the nook of the room. It’s very clearly not degree with the trim underneath the window. After all, there’s zero likelihood that the window is degree, so there shall be extra “splitting the distinction” required there as nicely.

After which there’s this wall, the waviest wall in the home. You’ll be able to see how wavy it’s simply by the shadows underneath the chair rail.

And there’s no disguising that wave with the trim.

The baseboard seems dangerous, however the chair rail look even worse. That hole is way greater than it seems within the image, however even within the image, it seems enormous. That’s means an excessive amount of to fill with caulk.

After which there’s this wall. Whereas the others have been dangerous, this one is the worst. The ground dips down within the center, so I’m left with this massive hole underneath the baseboards. Plus, the flooring doesn’t go all the best way to the wall as a result of the room isn’t sq., so one board tapers off proper within the center.

I believe that hole is simply too massive to cowl with common quarter spherical, so I’ll should get inventive.

After which working round a door that IS degree and sq., however that’s set right into a wall that isn’t in any respect degree made that chair rail set up even more durable. I needed to get the chair rail considerably consistent with the grid on the door on either side, however with the ground so unlevel, it was not a simple activity.

Anyway, this has been one of the crucial irritating tasks I’ve ever performed. I don’t bear in mind ever having to take away and reinstall trim as many occasions as I’ve needed to do on this room. And you’ll see the challenges that I’m coping with. I WILL get it performed, nevertheless it has been far more difficult than I anticipated. And I’m going to should do one thing about that wavy wall, which makes me really feel like I’m going backwards as an alternative of forwards. That’s irritating.
So, take it from me. In the event you’re desirous to do wainscoting in a room, be sure that the ground and ceiling are at the very least considerably degree first. When you’ve got areas which can be very clearly not degree, perhaps give you a Plan B and go away the wainscoting for an additional room. 😀
Extra About Our Grasp Bed room