The tape on the aspect cupboards nonetheless received’t keep in place, and I spotted that it’s due to the drive of the air motion that’s blowing into the room by way of the air vent, after which the pull of the air into the consumption vent within the hallway. The plastic begins billowing out in the direction of the lobby, pulling the tape off of the cupboards, and I’ve to maintain going again and pushing it again in. However at the very least it has stayed hooked up to the ceiling, in order that has made issues a lot simpler and fewer irritating. Patching these tiny holes from the pushpins received’t be troublesome in any respect.
Earlier within the week, I completed up the sanding in on the lobby partitions. They nonetheless appear to be a whole mess, however they’re easy and prepared for primer. After which I turned my consideration to the bed room. I couldn’t simply prime over the stripes on the bed room partitions as a result of these areas the place I had taped off these white stripes left ridges. They have been slight, however they might have proven by way of a coat of primer. I had thought of filling them in with drywall mud, however I ended up sanding the partitions as an alternative to easy out these ridges.
